Skip to content
Station
Simulated line. Calls in this workspace are simulated. Nothing is dialled.
Theme

Designed and built by Awan Forge

DisarmedTransport: SimulatedMicrophone not available
The station is starting.

Run a sample scenario

The simulated line follows the chosen script. No microphone is needed.

Station

Station settings, voice and audio, browser checks, a two-way audio test, the telephony and relay integrations, and the edge kit setup.

Station

The names shown in the header and the phrase that starts a run.

Voice trigger

Start a run by saying the trigger phrase while the station is armed.

In this browser
Speech recognition is not available.
Where speech is processed
Checking speech recognition.
Now
This browser has no speech recognition.

The browser's speech recognition works while this page is open. It is not an unattended offline wake word. The Run sample scenario button and the typed phrase on the Console always work.

The edge kit has its own optional wake phrase: Vosk running offline on the kit, with the recogniser limited to the words of the trigger phrase. It is set in the kit's configuration file.

Audio devices

The microphone and speaker this browser uses.

Device names are hidden by the browser until this site may use the microphone.

Saved in this browser. Recording and the microphone tests use it, or the default microphone if it is unplugged. Spoken triggers use the browser's default microphone.

Speaker

This browser cannot send page audio to a chosen device. It plays through the system output.

Capability checks

What this browser supports, checked when the page opened.

  • Speech recognition: Checking

    Checking speech recognition.

  • Microphone access: Checking

    The browser asks before this site uses the microphone. Nothing listens until you turn it on.

  • Audio recording: Checking

    Recordings are made in the first format this browser supports: WebM Opus, Ogg Opus, MP4 or WebM.

  • Audio playback: Checking

    Audio starts after your first click on a button that plays sound.

  • WebRTC: Checking

    Needed for the two-way audio test and the live connection in sample runs.

  • Output device selection: Checking

    Page audio plays through the system output.

  • Local storage: Checking

    The workspace, announcements and runs are kept in this browser.

Two-way audio test

Send audio both ways between two endpoints at the same time and measure what each receives.

This tests two WebRTC endpoints in this browser. It does not test a SIP trunk or a phone line.

Test

Needs no permission. Verified when B receives about 440 Hz and A about 660 Hz in the same measurement, both with packets arriving.

Endpoint A

Sends: A 440 Hz tone
Receives: What B sends

Packets received
0
Bytes received
0
Level
No signal
Strongest frequency
None measured

Endpoint B

Sends: A 660 Hz tone
Receives: What A sends

Packets received
0
Bytes received
0
Level
No signal
Strongest frequency
None measured

No test has run in this tab yet.

Paired test

The same test between two tabs or two devices, through a room that expires.

No room open.

Integrations

How this workspace reaches a telephone system and a relay output.

Passwords and keys are never entered here. They live in the kit's environment file, /etc/voxstead/agent.env. The settings below are stored in this browser only and are not sent anywhere.

Line transport

Simulated

This public workspace always uses the simulated line. No call leaves the browser and nothing is dialled.

Cloud telephony adapter

Not configured

Optional. The adapter contract is defined for a cloud telephony provider. This workspace has no settings for it.

Asterisk and SIP

Not configured

No settings saved. Enter the non-secret settings for the kit's Asterisk. Verified is set only by running voxstead-agent check on the kit. This website cannot run it.

A loopback or private network address, for example http://127.0.0.1:8088/ari. Plain http for loopback only.

The PJSIP endpoint of the kit softphone.

Optional

Leave empty to dial internal extensions only.

Internal extensions, digits only, separated by commas. The kit refuses to dial anything else.

Relay output device

Not configured

No settings saved. The simulator's output is simulated. Verified is set only by running voxstead-agent check on the kit. This website cannot run it.

Line offset on /dev/gpiochip0.

Output is on when the line is

Setup checklist

The steps for an edge kit, and an example configuration made from this workspace.

Nothing in this checklist has been run against real hardware by this website. Tick each item as you complete it on your kit. Ticks are kept in this browser.

0 of 19 done

Set up the kit
Controlled tests with 2101 and 2102 only

Download example configuration

Made in this browser from the active route its destinations and operators, and the Asterisk and relay settings above. The files contain no password or key: they say where each secret goes on the kit.

Workspace data

Where this workspace is kept, and how to start again from the sample data.

The workspace is stored in this browser (IndexedDB). Other browsers and devices do not see it.

Reset workspace to sample data

Restored: the sample station settings, routes, destinations and operators, the two sample announcements and the sample run history.Removed: uploaded and recorded announcements (0 now), every run made in this browser, the Asterisk and relay settings and the checklist ticks.A run in progress is cancelled. This cannot be undone.